The AEROVAP SD2M vapour control layer, fitted in an unbroken length, is airtight on the underside of the insulation. Made from a combination of non-woven PP sheets, AEROVAP SD2M is intended for insulated roofs and walls with wooden frameworks. AEROVAP SD2M prevents moisture from the home penetrating into the insulation. Its non-woven PP structure provides the necessary level of resistance during fitting, and AE Sd2m is particularly suitable for homes with wooden frameworks. INSTALLATION: The AEROVAP SD2M vapour control layer is fitted parallel to to the line of the guttering or the battens, overlapping in each case. The joints can be glued using our specially designed AEROTAPE or AEROSTIC glues. If the frame is made using formwork or wood, these materials need to be protected against the weather, at least temporarily. When fitting insulation, using AEROVAP SD2M as a vapour control layer and temporary covering is the best solution. The sheeting is fitted using invisible fastenings parallel to the line of the guttering across the whole surface, then glued down using our AEROSTIC glue or AEROTAPE, our adhesive tape. If the construction site takes longer than expected, it is recommended that the vapour retarder be held in place by a batten to add a degree of watertightness to the nails.
CE marking in accordance with EN 13984 standard